CHRYSLER PROBLEMS? WE HAVE YOU COVERED!
CHRYSLER SKIM RESET (SENTRY KEY IMMOBILIZER MODULE)
DID YOU RECENTLY REPLACE A PCM/ECM ONLY TO FIND OUT THAT THE ENGINE STARTED THEN DIED, EVEN AFTER THE COMPUTER WAS PROPERLY REPROGRAMMED? IF SO, YOU MAY ALSO HAVE A BAD SKIM MODULE WHICH WOULD CAUSE THE VEHICLE NOT TO RESTART. THIS SERVICE IS FOR THE REMOVAL OR THE SKIM SECURITY PROGRAMMING FOUND ON CHRYSLER, DODGE, AND JEEP ENGINE COMPUTERS.
WHAT WE OFFER:
WE REPROGRAM CHRYSLER 3 PLUG COMPUTERS TO REMOVE THE SKIM FEATURE THEN REWRITE THE VIN BACK TO THE COMPUTER. THIS WILL BE A PERMANENT SOLUTION FOR THE PCM REPLACEMENTS THAT HAD NO START CONDITIONS. IF YOU WOULD LIKE TO REMOVE SKIM FROM YOUR CAR, WITH A FAILING SKIM MODULE, YOU MUST FIRST UNPLUG THE SKIM MODULE BEFORE INSTALLING THE PCM THAT HAS HAD THE SKIM SECURITY CLEARED. THE SKIM MUST REMAIN UNPLUGGED FOR THE SKIM FEATURE TO REMAIN INACTIVE.
HOW SKIM WORKS
EVERY CHRYSLER PCM IS CAPABLE OF SKIM SECURITY, EVEN IF THE VEHICLE IS NOT EQUIPPED. THE COMPUTER LOOKS FOR SKIM SECURITY SIGNAL WHEN THE KEY IS TURNED ON. IF THAT SIGNAL IS FOUND, SKIM SECURITY IS NOW ACTIVATED IN THE PCM AND THE COMPUTER WILL NOW ALWAYS LOOK FOR THE SKIM MODULE. SKIM CLEARED PCMs CAN ALSO BE STARTED WITH BOTH SECURITY AND NON-SECURITY KEYS.
SECURITY LIGHT WOWES
WITH CARS EQUIPPED WITH SKIM THAT HAVE SECURITY DELETED, YOU WILL FIND THE SECURITY LIGHT MAY ILLUMINATE. UNFORTUNATELY, THE ONLY SOLUTION FOR THIS IS TO REMOVE THE SECURITY LIGHT FROM THE SPEEDOMETER OR DASH( MOST COMMON IN JEEPS)
IS THIS SERVICE PLUG-N-PLAY?
FOR MOST CUSTOMERS,THE SKIM CLEARED PCM CAN BE INSTALLED WITH NO ADDITIONAL PROCEDURES. SOME USERS FIND THAT GLOBAL CODE CLEAR MAY BE REQUIRED BEFORE THE VEHICLE WILL START.
PRICE
SKIM CLEARING ON 3 PLUG COMPUTERS: $110 (INCLUDES RETURN GROUND SHIPPING)
PLEASE NOTE THIS IS FOR GAS CONTROLLERS ONLY
WHATS REQUIRED TO RESET THE SKIM ON MY PCM?
WHEN SENDING ANY PCM FOR SKIM RESET, PLEASE INCLUDE THE FOLLOWING IN THE BOX:
Please Fill Out the Form Below And Print.
SHIP ALL MODULES TO:
PLUGNPLAYPARTS
3525 NEW TOWN BLVD.
ST. CHARLES, MO 63301